|
P68
by Harman
|
 |
 |
 |
 |
|
Bio-Mass Pellets |
| |
|
0 to 68,000 |
| |
|
2,200+ sq ft |
| |
|
76 lbs (136 lbs w/hopper extension) |
| |
|
135 cfm |
| |
|
3 inches |
| |
|
2-3/8 inch |
| |
|
6 amp |
| |
|
290 lbs |
| |
|
29-1/2 inches |
| |
|
25" wide x 33" deep |
| |
|
36-7/8 inches |
| |
|
23-1/2 inches |
| |
|
Tested by OMNI-Test Laboratory |
| |
 |
|
|
|
 |
 |
|
|
The Harman P68 Pellet Stove will burn any grade of pellet at maximum efficiency. Wood pellets have become a popular form of heat because they are environmentally friendly, extremely clean burning and cost effective. This means you can purchase the lower quality pellets and still keep your home at your desired temperature.
The P68 automatically lights its own fire and burns at the correct output to maintain the desired room temperature. When no heat is required, the P68 will shutdown and re-ignite when the demand for heat returns.
Just fill the hopper with pellets and set the desired temperature. The P68 will do the rest except for ash removal, which will be needed after approximately one ton of pellets has been consumed.
From the quality of the newly designed door handle, to the laser-cut and etched details on the accessories, the P68 is in a class all its own.
The P68 incorporates the Harman ESP Probe, which controls the exhaust temperature. The ESP Probe will shut down the feed motor if the temperature reaches a predetermined high limit temperature in the exhaust. A pressure switch will sense a loss of draft (from a door left open or a blocked flue) and automatically stop feeding pellets and shut down the P68.
|
|
